Sound Card Audio Interface USB Mic Preamplifier Guitar Bass Computers Recording. A new generation of 2x2 microphone preamplifier, with more powerful technology and compatibility, with a high-speed USB2.0 interface and 24 Bit / 192 Khz audio resolution, can provide excellent recording quality, very suitable for Mic, guitar, bass, computers and Other equipment recording. Frequency response: -1 / -1 dB, 20 Hz - 20 kHz.Dynamic Range: 82 dB, A weighting. THD+ N 0.03 %, 1 kHz.
Maximum input level: +6 dBu Input resistance 4 kO. Gain range: +3 dB- +60dB. Maximum input level: +3.0 dBV. Gain range: 0dB - +40 dB. Maximum input level: + 10 dBu.Input resistance: 18.5 kO. Gain range: -10 dB - +40 dB. THD + N 0.03 %, 1kHz. Maximum input level: + 6 dBu. Maximum input level: 15 mW + 15 mW, 40O.
Technical specifications: full speedUSB 2.0, 24-bit, 44.1kHz/48kHz/88.2kHz/96kHz/176.4kHz/192kHz. Polarity: 1 Grounding 2: Hot wire (+) 3: Cold wire (one). 1 x USB Audio interface.1 x Type A to B High Speed Cable. Setting of the transfer switch correct? When power is not supplied to the device, the power indicator is off. When using an AC adapter, move the switch to the [5V DC] jack, and move the switch to the [USB 2.0] jack to provide bus power (computer only).
The power indicator blinks continuously. If the power is insufficient, the indicator light will continue to flash. Move the switch to the [5V DC] jack, and then use the USB power adapter or USB mobile battery to supply power. Confirm whether the correct USB cable is used.Be sure to use the included USB cable. Is the volume control of this device set to the correct level? Confirm the [OUTPUT] knob and [PHONES] knob. Are the microphone and speakers properly connected to the device? Please refer to the "Manual" to confirm the correctness of the connection.
Is the power switch of the speaker turned on? Make sure the switch of the speakers is turned on.Abnormal sound (noise, interruption or distortion). Does the computer meet the system requirements? The PC operating system is too old, reconfigure the PC operating system. Check whether the recording level is overloaded, it is recommended to set the recording level at 0dB (0dB= IV).
Are you recording or playing long continuous audio? The computer's audio data processing capability depends on many factors, including CPU speed and access to external devices, reducing the audio track and then checking the sound again. Is the microphone properly connected to the device? Connect the microphone to the device with an XLR type plug. (TRS is only used for LINE input).
There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Audio/MIDI Interfaces". The seller is "sauliai" and is located in this country: CN.
This item can be shipped worldwide.