Note: When operating at 88.2 kHz or 96 kHz, up to 16 inputs and 16 outputs are possible. When operating at 176.4 kHz or 192 kHz, up to 12 inputs and 12 outputs are possible. Eight XLR/TRS inputs with +48 V phantom power and two TRS inputs switchable between 10 dB and +4 dB S/PDIF coaxial input/output enables connection with an external AD/DA converter Word input/output enables connection with an external clock generator Three switchable modes - Interface, Mic Preamp and Mixer The versatile US-20x20 is an Interface for multitrack recording using a personal computer and DAW, a standalone mic preamp, or a mixer for live performances. Mic preamp mode enabling use as a microphone preamplifier for analogue/digital output Mixer mode enabling use for PA/SR and use as a keyboard mixer Advanced DSP mixer paired with a new USB driver An obstacle with computer-based recording is latency (delayed audio signals). New driver software has been developed to eliminate latency issues and driver setup problems.
The built-in mixer utilizes the high-performance Dual Core BlackFin DSP making it possible to offer 4-band EQ and compression on each channel. Note: When operating at 176.4 kHz or 192 kHz, the effects (EQ, compression, phase and reverb) of the DSP mixer cannot be used. High-resolution recording at up to 192 kHz/24 bit USB 3.0 computer connection, a leading-edge transmission standard Advanced DSP mixer with 4-band equalizer and compressor on each channel Reverb effect for monitoring enhances the performers motivation Driver software can be installed without connecting the interface Support for iOS devices and compatibility with many DAW applications Tascam US-20x20You will not need another audio interface if you decide you want to make music using an iPad or other iOS device. The performance of these interfaces has been tested with major DAWs - you can continue to use them even if you change DAW software. Since these units include MIDI inputs and outputs, they can also be used as MIDI interfaces.Connect with an iPad or another iOS device Tested with Sonar, Pro Tools, Cubase, Live, Studio One and GarageBand MIDI input and output enable connection with keyboards and other MIDI devices Rackmount adapters and hex keys are included Tascam US-20x20You can either utilize the brackets for rackmount installations or unscrew the brackets with the hex keys provided when using on a desktop. High-quality Ultra-HDDA (High Definition Discrete Architecture) microphone pre-amps with ultra-low noise (EIN: 125 dBu) Recording at up to 192 kHz/24 bit Support for Windows and Mac operating systems USB 3.0 computer connection for 40-channel audio transmission at 44.1/48 kHz or 24-channel audio transmission at 176.4/192 kHz - 20 inputs/20 outputs available at 44.1/48 kHz/24 bit (10 analogue channels + 2 digital S/PDIF channels + 8 optical channels) - 16 inputs/16 outputs available at 88.2/96 kHz/24 bit (10 analogue channels + 2 digital S/PDIF channels + 4 S/MUX optical channels) - 12 inputs/12 outputs available at 176.4/192 kHz/24 bit (10 analogue channels + 2 digital S/PDIF channels) Three selectable operation modes: audio interface, standalone micpreamp, digital mixer DSP mixer with 4-band EQ and compression on each input channel (can be used in Interface/Mixer mode) Patch bay allows outputs to be assigned freely (can be used in Interface/Mixer mode) DSP mixer settings can be stored in up to 10 scenes USB Audio Compliance 2.0 for iPads and other iOS devices Reverb effect can be added to the monitored audio Low-latency monitoring via the DSP mixer Inputs and outputs Eight XLR/TRS combo jack analogue inputs with switchable phantom power (48 V) Inputs 1 and 2 can be used for direct guitar input Two TRS (balanced) inputs on rear panel Input level range of 56 dB for using dynamic mics Ten TRS (balanced) analogue outputs TOS LINK optical digital multi-channel input and output (8 channels at 44.1/48 kHz, supporting S/MUX2 and S/MUX4) S/PDIF coaxial digital input and output BNC word clock input and output Two standard TRS headphones outputs with 2 x 70 mW output power Separate controls for line and headphones output levels MIDI input/output Other features DAW compatibility (Sonar, ProTools, Cubase, Live, Studio One, Garage Band) Rack-mount adapter included Dedicated AC adapter included Angled industrial design provides excellent usability on a desktop. 8 x 1/4 TRS 1 x MIDI 1 x S/PDIF Coaxial 1 x word clock.
1 x MIDI 1 x S/PDIF Coaxial 1 x word clock 8 x XLR / Jack Combo. The item "Tascam US-20x20 USB3.0 20 Channel Audio / MIDI Interface" is in sale since Monday, March 20, 2017.This item is in the category "Musical Instruments\Pro Audio Equipment\Audio/MIDI Interfaces". The seller is "scancomputers_int" and is located in Bolton. This item can be shipped to United Kingdom.