The USB 3.0 interface uses class-compliant drivers for future-proof use with computers and tablets, while a built-in DSP mixer includes parametric EQ and compression on every channel, and a stereo reverb send for enhancing monitor mixes. The DSP mixer can store up to ten snapshots as scenes, making it easy to recall mixer settings, and can also be used as a live mixer or sub-mixer with computer control. Ultra-HDDA (High Definition Discrete Architecture) mic preamps with? Eight Ultra-HDDA micpres with XLR/TRS and connector, two TRS inputs. 3 mode switching of Interface/Mic preamp/Mixer.Support for Windows and Mac. USB 3.0/2.0 computer connection USB3.0 requires Windows 10 or OSX 10.11.2 (or later). Connect with iPads and other iOS devices. +48V phantom power for all inputs.
Input level specifications boast a range of 56 dB for using dynamic mics. Tough metal casing for durability. Angled design provides excellent usability on a desktop. Two standard TRS headphones output jack with 70mW + 70mW output power. Separate controls for line and headphones output volumes.
Low-latency monitoring via on-board DSP mixer. DSP mixer with 4-band EQ and compression on each input channel(Can be used in Interface/Mixer mode).On-board Reverb effect ideal for monitoring on interface mode or PA/SR on mixer mode. Patch bay allows outputs to be assigned freely(Can be used in Interface/Mixer mode).
Scenes can store DSP mixer settings (up to 10+1 scenes can be stored and named). S/PDIF coaxial digital input/output connectors. TOS LINK optical digital multichannel input/output connectors (supporting SMUX2 and SMUX4).
BNC word clock input/output connectors. USB class compliant 2.0 support. Confirmed operation with major DAW software (SONAR, Pro Tools, Cubase, Live, Studio One, GarageBand). USB2.0 cable and USB3.0 cable included. Sampling frequencies: USB 3.0: 44.1/48/88.2/96/176.4/192 kHz USB 2.0: 44.1/48/88.2/96 kHz.
IN2: XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD). Input impedance: 2.4 k? Nominal input level (gain knob at MAX):? 68 dBu (0.0003 Vrms).
Nominal input level (gain knob at MIN):? 12 dBu (0.195 Vrms). Maximum input level: +8 dBu (1.947 Vrms).IN2: 6.3mm (1/4) standard TS jacks (Tip: HOT, Sleeve: GND). Nominal input level (gain knob at MAX):? 68 dBV (0.0004 Vrms). Nominal input level (gain knob at MIN):? 12 dBV (0.251 Vrms). Maximum input level: +8 dBV (2.512 Vrms). IN8: 6.3mm (1/4) standard TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND). Nominal input level (gain knob at MAX):? 52 dBu (0.0019 Vrms). Nominal input level (gain knob at MIN): +4 dBu (1.228 Vrms).
Maximum input level: +24 dBu (12.282 Vrms). Line inputs unbalanced, LINE IN 9?
10, LEVEL switch set to? 10dBV: 6.3mm (1/4) standard TS jacks (Tip: HOT, Sleeve: GND). 10 dBV (0.3162 Vrms). Maximum input level: +10 dBV (3.162 Vrms). Line inputs balanced, LINE IN 9?
10, LEVEL switch set to +4dBu: 6.3mm (1/4) standard TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND). Nominal input level: +4 dBu (1.228 Vrms). Line outputs balanced, LINE OUT 1? 10: 6.3mm (1/4) standard TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND).Nominal output level: +4 dBu (1.228 Vrms). Maximum output level: +24 dBu (12.277 Vrms). Headphones outputs (PHONES 1/2): 6.3mm (1/4) standard stereo jacks. Maximum output power: 70mW + 70mW (THD+N 0.1% or less, into 32?
Frequency response (Input to PHONES 1/2 output): At 44.1 kHz and 48 kHz: 20 Hz? 20 kHz, ±1.0 dB (JEITA) At 88.2 kHz and 96 kHz: 20 Hz? 40 kHz, ±2.0 dB (JEITA) At 176.4 kHz and 192 kHz: 20 Hz?
80 kHz, ±5.0 dB (JEITA). Digital audio inputs and outputs. COAXIAL IN: RCA pin jacks.
Signal format: IEC 60958-3 (S/PDIF). Input level: 0.5 Vpp/75? COAXIAL OUT: RCA pin jacks. Signal formats: IEC 60958-3 (S/PDIF) or IEC 60958-4 (AES/EBU), selectable on the Settings Panel.
Output level: 0.5 Vpp/75? OPTICAL (S/MUX) IN/OUT: OPTICAL (JEITA RC-5720C). Signal format: Multi-channel optical format (supports S/MUX at 88.2 kHz, 96 kHz, 176.4 kHz or 192 kHz). USB: USB 3.0 B type. Transfer rate: USB 3.0 Super Speed (5 GBit/s).
WORD IN: BNC (Termination on/off switch included). Input voltage: 2.0Vpp - 5.0Vpp.
Permitted frequency deviation during external synchronization: ±100 ppm. WORD OUT: BNC (OUT/THRU switch included).
Output voltage: 2.0 Vpp (into 75? Sampling frequencies: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz.
Mic amp EIN (equivalent input noise):? Frequency response Input to LINE OUT (BALANCED): At 44.1/48 kHz: 20 Hz? 20 kHz, ±0.5 dB (JEITA) At 88.2/96 kHz: 20 Hz? 40 kHz, ±0.5 dB (JEITA) At 176.4/192 kHz: 20 Hz?
80 kHz, ± 5 dB (JEITA). S/N ratio: 104 dB or higher (MIC/LINE IN to LINE OUT, gain knob at MIN, JEITA). Distortion: 0.004 % or less (MIC/LINE IN to LINE OUT, 1 kHz sine wave, at nominal input level and maximum output level).Crosstalk: 100 dB or more (MIC/LINE IN to LINE OUT, 1 kHz). Power supply and other specifications. Dimensions (W×H×D): 445 mm × 59 mm × 222 mm (with standard frame attached) 483 mm × 44 mm × 222 mm (with rack mount adapters attached). Permissible operating temperature range: 5? That's why we go to great lengths to provide accurate, full-detail descriptions in every item. How do I return an item? We will promptly issue you a Return Authorization (RA) number. Oversized items digital pianos, etc. Product must be in resalable condition. The item "Tascam Celesonic US-20x20 20-in/20-out USB 3.0/ 2.0 Audio Interface NEW US20x20" is in sale since Monday, February 1, 2016. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Audio/MIDI Interfaces". The seller is "gigasonic-outlet" and is located in San Jose, California. This item can be shipped worldwide.