Used less than 10 times in total then left on the shelf for more than a year. Still works great - you can see from the images that inputs 1 and 2 are still working perfectly. I bought two of these originally and I use the other almost every day and it's a fantastic device. This was bought as a spare for travelling with as it's super portable but I've been working from home almost exclusively so this one hasn't been required. NOTE: This only includes the device, not the Microphone pictured, nor any XLR cables.
I will include a USB cable which it runs power from and delivers audio to other devices through. Two-channel, portable, high-resolution USB audio interface for Mac OS and Windows. Balanced mic/line analog and coaxial/optical SPDIF I/O, with up to 24 bit/192 kHz resolution. 48V phantom, peak limiters and high-pass filter on microphone inputs.Stand-alone operation allows use as microphone preamplifier and A/D converter. Extended bandwidth, low-noise microphone preamplifiers with 48 V phantom, limiters, high-pass filters, and 15 dB pad. Dynamic range greater than 114 dB (in 24-bit operation). Each input individually selectable between microphone, line, and aux level signals (both channels selected simultaneously for S/PDIF connections). Precision, 23-segment, multicolor LED peak/VU meter, selectable between input and output sources. High-output headphone amplifier can drive a wide range of headphones.
Balanced outputs on XLR connectors with dedicated level control can be used to drive line- or mic-level inputs. Mix control enables zero-delay monitoring of source audio, computer audio, or a mix of both source and computer audio for multitrack recording or computer telephony. Phono (RCA) jacks connect Aux Output to external loudspeakers or preamplifiers. Bus powering via USB for convenient, single-cable connection to the computer. In Stand-Alone mode the USBPre 2 operates as a microphone preamplifier and analog-to-digital converter.
Hardware loop-through for test and measurement to send computer audio directly back to an input. Mac® OS X 10.4+, Windows®XP/Vista/7, and Linux, class-compliant audio device. Additional features controlled by hardware DIP switches on the back panel; no software-only features and no control panel.USBPre 2 Portable High-Resolution Audio Interface. 2 is a high-resolution, portable hardware interface for Mac- and Windows-based digital audio. The USBPre 2 is the industrys highest performance and most flexible portable interface, connecting professional microphones, line-level sources, consumer audio electronics, and S/PDIF digital sources with Mac OS and Windows computers via USB.
USBPre 2 includes two discrete-transistor microphone preamps with 24-bit converters and sampling rates up to 192 kHz. These preamplifiers provide the highest performance in any portable interface. Their topology is shared with Sound Devices award-winning 744T Digital Audio Recorder.
Peak limiters, high-pass filters, and a 15 dB pad provide overload protection. All analog-to-digital and digital-to-analog conversion is performed by the USBPre 2 for superior audio performance. USBPre 2 allows for simple plug-and-play connection to computers running Mac OS, Windows, and Linux. There are no drivers to install for the USBPre 2 and there are no software-only features. All additional controls and settings are available on back panel DIP switches.
The USB port also provides power to the unit, both when connected as an audio interface and when used in Stand-Alone operation. As a class-compliant audio device, the USBPre 2 is limited to a maximum data rate of 24-bit, 48 kHz in Windows, Linux, and Mac OS versions 10.4 to 10.5.7.
Mac OS 10.5.8 and higher support the audio class 2.0 device and can address the USBPre 2 up to 24-bit, 192 kHz. To enable higher sampling rates in Windows OS, download the available Windows ASIO driver. To interconnect with sound systems big and small, the USBPre 2 includes numerous output connection types, including balanced mic- or line-level on XLR, unbalanced consumer line-level on RCA, S/PDIF coaxial (RCA) and optical (Toslink). The outputs have their own, dedicated front-panel level control. Use the balanced line-level signals to connect to powered loudspeakers.
Use the optical S/PDIF to connect to hi-fi systems. Use the coaxial S/PDIF output in Stand-Alone mode for a portable microphone preamplifer with digital output for any production application. Accurate signal level metering is essential for any sound engineer. The USBPre 2 includes a 23-segment, multicolor LED meter for precise level indication.
The meter is switchable between input signal metering and playback signal metering. The meter indicates both VU and peak (PPM) ballistics. Like all of Sound Devices products, the USBPre 2 is designed to stand up to the most demanding environments.
Its extruded aluminum chassis and aluminum panels, machined knobs, metal connectors, and laser-etched nomenclature are designed to hold up to years of abuse. The USBPre 2 can be used in Stand-Alone mode where it operates as a high-quality, portable microphone preamplifier and analog-to-digital converter. Digital signals connected to the USBPre 2 are converted to analog and available at the headphone, XLR, and RCA outputs. Stand-Alone operation requires the unit to be connected to a USB power source.
Stand-Alone mode is a great option when an additional microphone preamplifer, A-D converter, or D-A converter is required. Sound Devices USBPre 2, 2 Channel High Definition USB Audio Interface" is in sale since Wednesday, November 13, 2019. This item is in the category "Musical Instruments\Pro Audio Equipment\Recorders". The seller is "kettledrumhamster" and is located in Nottingham.
This item can be shipped to United Kingdom.